Tuesday, 12 September 2017 21:25

The AIRCAT 6700-DCE Series Electric Palm Sander/Polisher

Written by

Ask a body technician about sanding and polishing, and you will likely hear many of the same things over and over again.

"It's dirty and dusty." "It's loud and hard on my hands and shoulders." "There are other things I'd rather do!"

 

Well, until we can get robots to sand and polish our next generation's fleet of self-driving cars, body people are still going to have to do the task themselves on a daily basis. That's why the 6700-DCE Series Electric Palm Sander/Polisher by AIRCAT is here.

 

By alleviating all of the less desired aspects of sanding and painting, this tool was designed with collision repair body shop professionals in mind.

 

With three push button speed settings (10,000, 7,000 and 4,000 RPM) the 6700-DCE Series by AIRCAT is poised and prepared to do every aspect of the job. If you need to move quickly, you have the power to get it done, but if you need to slow down and concentrate on a specific portion of the vehicle, you can achieve that easily as well. By stepping it up or backing off, you have the flexibility you need right in the palm of your hand.

 

Body techs are punishing their bodies all day long, and the shop floor can get loud when things get busy. So, they should be happy to hear that the 6700-DCE Series Electric Palm Sander/Polisher by AIRCAT is both comfortable on the hands and quiet to the ears. By featuring low vibration technology, this tool won't fatigue your hands and arms and with a noise level at approximately 70 d(B)A, the shop radio is probably louder. In addition, it's clean and green, because it releases zero exhaust air or air borne oil into the shop environment.

 

When it comes to any tool or piece of equipment, the idea is to buy it, use it and rely on it to not breakdown. With its sturdy design and construction, the 6700-DCE Series Electric Palm Sander/Polisher by AIRCAT will perform day and night without issues down the road.

 

It comes with a 6", 5" or 3" VELCRO sanding backing pad; a 4-ply 100 percent twisted wool 6" polishing bonnet and a 6" foam polishing/compounding pad so you can get right to work with the 6700-DCE Series Electric Palm Sander/Polisher by AIRCAT.

 

While power can be an obstacle with many other sanders/polishers, it's never a problem with the 6700-DCE Series Electric Palm Sander/Polisher by AIRCAT. Air sanders normally maintain only 60 percent of their speed under load, while this polisher holds strong at 85 percent. When you need it to go that extra mile on a time-intensive repair, this unit has the power to get it done.

 

You can use this tool wherever there is an AC power point within 20 feet. The DC cable and tool are totally shock-free, so increase your productivity and alleviate the problems associated with sanding and polishing today by getting a 6700-DCE Series Electric Palm Sander/Polisher by AIRCAT.

Read 270 times